Fishing Charters Milwaukee Presentation Tips #8
March 13, 2008
By Captain Jim Hirt
In previous articles we covered spring presentation and location. As we go into summer our presentation evolves to follow the temperature of the fish you are targeting. This time of year, you should look for most of your fish in the top 40 feet. Keep your eye on your locator and also work deeper marks when you see them.
My experience tells me that this time of year the deeper fish are less active and tend not to bite. Most often you will not mark well above 30 feet because those fish are outside the cone of your locator’s transducer.
The primary presentations I use at this time are planer boards, dipsey divers and leadcore. On all my rods in spring, I run a 20-25 pound test monofilament with a 12-pound leader. You need to go with a light leader to produce good action in clear water near the surface. Run the heavier test to a bead chain sinker or barrel swivel, then an 8-foot leader with a cross lock snap.
Starting out this way, I will have the rods loaded with the correct line for most presentations later in the season. I use a standard dipsey set up with an interesting twist. Opti-Dodger has a clear snubber, which I run right behind the dipsey and then 8 feet of 25-pound mono to the snap.
The purpose of the snubber is to reduce the shock of the strike on the monofilament and it stretches initially to recoil and setting the hook into the fish, I am almost 100% on the number of hits to fish boated with this set up.
When I get those ugly days that the action slows, I throw in my leadcores. It is not a presentation that is fun to reel in fish on. 500 feet of line is a lot of cranking. Leadcore will produce when nothing else will. I will go into details on set up and running lead in the next article.
Jim charters out of Milwaukee, WI. with Blue Max Charters. He can be reached at 414-828-1094 or visit his web site at http://www.bluemaxcharters.com Copyright© 2006, James J. Hirt, All Rights Reserved.


After a little internet searching, reading, and checking up on this stuff I found it’s a pretty well established product in Canada and hails from Quebec where they have this funny habit of speaking a lot of French. Thus the name, Jig-A-Loo, and the company’s claim it derives from a saying they have up north, “I’ve got it!” 

Comments
Got something to say?